|
| |
| Farmall & IHC Tractors Discussion Forum |
Topic: 806 International
[Return to Forum]
| Author |
[Modern View]
|
| TMH
09-02-2012 11:38:30
67.142.165.24
|
I have an 806 dual speed PTO I am attempting to R&R the seals on the outer plate. Have gotten the outer plate about 1/2" from main unit and it hangs up. I have tried to pry it off with no luck. Can anybody offer info. to get cover plate the rest of the way off.
|
|
[Reply] [No Email] | |
| Owen Aaland
09-02-2012 18:47:27
216.47.35.155
|
|
Re: 806 International in reply to TMH, 09-02-2012 11:38:30
|
| Hy-Capacity offers a 540 seal assembly that can be installed on the outside of the housing using the threads for the PTO shaft shield. See part number 830470, IPTO Seal Assembly on their web site.
|
[Reply] [No Email] | |
| pete 23
09-02-2012 13:10:07
74.32.238.2
|
|
Re: 806 International in reply to TMH, 09-02-2012 11:38:30
|
| You cannot get the outer plate off until you remove the pump, clutch pack and drum which is all done from the other side. You have to pull the whole unit off and take it apart. You can replace the 1000 rpm seal from the outside but the 540 seal is installed from inside. You need a few special tools that can be made to compress spring of clutch piston and brakes.
|
[Reply] [No Email] | |
| TMH
09-02-2012 14:04:40
67.142.165.23
|
|
Re: 806 International in reply to pete 23, 09-02-2012 13:10:07
|
| Thank you pete 23
Tim
|
[Reply] [No Email] | |
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|
