|
| |
| Farmall & IHC Tractors Discussion Forum |
Topic: 340 hydraulics.
[Return to Forum]
| Author |
[Modern View]
|
| Smithview Farm
08-23-2012 05:55:39
24.229.160.200
|
I bought a 340 utility with non working hydraulics. I have never messed with hydraulics. Looking for advice on where to start any tests or steps I should take to start me off?
|
|
[Reply] [No Email] | |
| old
08-23-2012 08:51:44
209.86.226.27
|
|
Re: 340 hydraulics. in reply to Smithview Farm, 08-23-2012 05:55:39
|
| First thing to check is the fluid and it is has any or if it has a lot of water in it
|
[Reply] [No Email] | |
| Andrew Z
08-23-2012 07:37:40
71.233.255.29
|
|
Re: 340 hydraulics. in reply to Smithview Farm, 08-23-2012 05:55:39
|
| | On the right hand side of the 'torque tube' will be a oval plate held in by 10 or so bolts remove that. That will gain access to the hydraulic filters, these can be cleaned or replaced. I have had a few tractors (of that related series) over the years with a sluggish to almost no hydraulic out put caused by lack on maintenance of the filters. Try that first, pretty cheap and easy. Also make sure the fluid is good, clean and at the right level. Andrew
|
[Reply] [No Email] | |
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|
