Big Bore Super C

Anonymous-0 · Jun 29, 2012

I just took apart my Super C ingine and it has a 3 1/4 bore. I need a flat top piston and don"t know where to find one. I think this bore is unusal, don"t you? They dont have a flat top piston on this site. Need 1 piston and a set of rings.

Andrew Z · Jun 29, 2012

Post on a want add on the classifieds page. Or go to CHN.com and or messicks site and get a piston there.Over the years as people rebuilt the C123 engine (the one in your super C) most of them were equipped with the overbore. Actually more common to see the 3 1/4 in there then the stock 3 1/8 no a days.

Andrew

gene bender · Jun 29, 2012

I dont knoe sbout the flat top but you can get hi-dome from Abeline Machine look them up and they probably will have the flat tops also.

Anonymous-0 · Jun 29, 2012

Thanks Gene.. Got the pistons from them and a fair price as well. Very good people to work with.

Big Bore Super C

Anonymous-0

Well-known Member

Andrew Z

Well-known Member

gene bender

Well-known Member

Anonymous-0

Well-known Member

Similar threads