4230 puller
New User
I have a rear mount belt pulley that i am thinking of selling does anybody have any idea what it might be worth. I believe it will fit from a 300 up to a 560. Thank You
- Thread starter 4230 puller
- Start date
About two months ago, I bought a rear right angle PTO for $125 on eBay. The fiber pulley is in poor shape but I don't need it. I think there might have been four bidders.
About seven or eight years ago, I saw one go for over $700 on eBay. I think it came off a 1000 rpm PTO.
About 15 years ago, I purchased a NOS unit in a crate for probably less than $50. It was formerly owned by a dealer who bought it at another dealer's auction.
Bear in mine that there are at least two different gear boxes and they look the same. It's a gear ratio thing. Some also have a different length female input even though they can both have a six spline. It is a little confusing unless one does a parts book investigation.
<a href="http://s140.photobucket.com/albums/r16/Wardner/?action=view&current=Wang-tractor043.jpg" target="_blank">
![Wang-tractor043.jpg" border="0" alt="Photobucket](https://i140.photobucket.com/albums/r16/Wardner/Wang-tractor043.jpg" border="0" alt="Photobucket)
</a>
<a href="http://s140.photobucket.com/albums/r16/Wardner/400%20hydro-creeper/?action=view&current=400141.jpg" target="_blank">
![400141.jpg" border="0" alt="Photobucket](https://i140.photobucket.com/albums/r16/Wardner/400%20hydro-creeper/400141.jpg" border="0" alt="Photobucket)
</a>
About seven or eight years ago, I saw one go for over $700 on eBay. I think it came off a 1000 rpm PTO.
About 15 years ago, I purchased a NOS unit in a crate for probably less than $50. It was formerly owned by a dealer who bought it at another dealer's auction.
Bear in mine that there are at least two different gear boxes and they look the same. It's a gear ratio thing. Some also have a different length female input even though they can both have a six spline. It is a little confusing unless one does a parts book investigation.
<a href="http://s140.photobucket.com/albums/r16/Wardner/?action=view&current=Wang-tractor043.jpg" target="_blank">
<a href="http://s140.photobucket.com/albums/r16/Wardner/400%20hydro-creeper/?action=view&current=400141.jpg" target="_blank">
4230 puller
New User
Wardner Thank You for your information, Tom
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy