(800) 853-2651
SHOP NOW

IH mechanics in Ontario


I have owned a 624 for about ten years now.

Perhaps my local dealer has the answer you want?

Alont

[near Winchester,Ontario]
 
He may. The tractor came ainto Ohio and they were not sold in the US. We have it apart because the clutch is out. However we have no dimensions for anything. Thank you for the reply. J.
 
(quoted from post at 15:18:44 12/20/10) He may. The tractor came ainto Ohio and they were not sold in the US. We have it apart because the clutch is out. However we have no dimensions for anything. Thank you for the reply. J.
Click to expand...

I have the Parts Manual for model 624, 724 Diesel with Front Loader and
the Operators Manual.

The Engine Clutch is at the front of the assembly and the PTO clutch at the back.

Part No 3 131 328 R1 is described as Lining [4], so I assume the linings for both clutches are identical.

I will ask the Parts Manager tomorrow, if he can find any clutch dimensions.

At present I have a 460 Utility with all the hydraulic valves out, new Hydraulic pump, filter and lots of Hy tran to go in.

Alont
 
I think we have that all handled. We want to know recommended free travel and if there is any setting on the PTO clutch. Interesting the bolts holding the starter on are American. The tractor also has a loader. Do you know the name of the hydraulic fittings? How can we contact you? You can find me on the HPOCA website (oliver site) Thank you for your interest > J.
 
When the clutch is fully engaged the clutch pedal should have a free travel of approx 1.57 inches.
To adjust-back out the stop screw until free pedal movement is 1.57 inches, secure the screw with the locknut.

Remove the cotter and headed pin from clevis. Turn the clevis until the distance from the pedal bottom to platform is approx 5.5 inches.

From the operators manual


Alont
 
Thanks! That is what we are looking for!. What about the PTO part of the clutch? I also sent you an e-mail. Again,thanks for the reply. J.
 
You must log in or register to reply here.

Similar threads

C
IH 454
Replies
6
Views
525
Craig2
C
P
IH 624 - Dissembling fuel pump, injection pump gear ?
Replies
3
Views
259
Dieseltech
D
S
JD 300-J year serial number service manual help
Replies
14
Views
478
Tx Jim
Tx Jim
W
International 500 Diesel Crawler / Dozer Radiator Hose
Replies
4
Views
321
caterpillar guy
C
W
IH 434 Steering
Replies
9
Views
746
WPM
W
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top