Does anyone have experience with a factory IH quick attach bucket adapter for a 2250/2350 front end loader? I have 3 different attachments for the front of my loader and would like to have one instead of pulling pins all the time. I have seen some companies that make adapters to mount skid-steer attachments to front end loaders but all of my attachments were manufactured for my 2250 loader. I have seen pictures of the quick attach set up but have never seen one in person. Any ideas on where to look for one? I checked with the dealer and it is no longer available.
- Thread starter kpowl
- Start date
495man
Well-known Member
Not much help, but I recall seeing one and all it was a bracket that stayed on the loader and had a open set of "hooks" that grabbed a set of pins left in the attachment, seems to me you still had to pin the lower set, but they were lined up perfectly when you curled the bucket back.
What I'd do....
buy a Horst (or similar) bracket that accepts the Euro/Global attachment and weld euro mounts on your attachments. Your loader would then accept any of the new attachments.
JimB2
Well-known Member
- Location
- Ottawa, Ontario, Canada
Hi, my brother has the quick attach bucket adapter on his 2250 loader. He only switches between bucket and round bale speer. The good thing is he can do the switch by himself.
JimB
JimB
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy