Anonymous-0
Well-known Member
Our FF tractor has some pretty rusted lines running to the battery box are these still availible or whats a good fix rusted right at the bend Thank you Jerry
- Thread starter Anonymous-0
- Start date
Janicholson
Well-known Member
Rusted through is not fixable.
Three choices. Find good used lines, Tough to locate.
Use Hoses. Not stock, ugly, and in the road.
Take yours off carefully and have a fab shop duplicate the lines and put on the manifold blocks. Expensive but real. Jim
Three choices. Find good used lines, Tough to locate.
Use Hoses. Not stock, ugly, and in the road.
Take yours off carefully and have a fab shop duplicate the lines and put on the manifold blocks. Expensive but real. Jim
There have been three 400-450 dismantled in the past month on eBay by the same guy. Those hydraulic lines would probably have cost you $9.99 plus shipping. I have a feeling that anything that doesn't sell at auction goes into the dumpster immediately. But you could email marty2374 to see if he still has them, or at least one set.
In my opinion, anybody who has a future need for an item and doesn't create a standing eBay alert for it, is sourcing parts the hard and expensive way. Yep, you may have to wait a month or two, but it will pop up one of these days if not immediately.
For instance, I have wanted a 400 rockshaft since July to put on the front of my W-400. I have seen three come up with a starting price in excess of $100. I know that part is basically worthless because they don't need to be replaced. I waited for Marty2374 to wreck a 400 and now the rockshaft is currently in the mail to me. I paid $9.99 and won four other auctions at the same time. eBay alerts notified me of the pending auction.
In my opinion, anybody who has a future need for an item and doesn't create a standing eBay alert for it, is sourcing parts the hard and expensive way. Yep, you may have to wait a month or two, but it will pop up one of these days if not immediately.
For instance, I have wanted a 400 rockshaft since July to put on the front of my W-400. I have seen three come up with a starting price in excess of $100. I know that part is basically worthless because they don't need to be replaced. I waited for Marty2374 to wreck a 400 and now the rockshaft is currently in the mail to me. I paid $9.99 and won four other auctions at the same time. eBay alerts notified me of the pending auction.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy