I have questioned about a beely mower for my old A. Looking at some pictures of the mount from the pto, it looks like I do not have the horizontal shaft to hook up the mower. What am I missing? Is this something that was not available on mine or can it be added somehow to my tractor? I"ll try & attach a picture of what I have for a pto shaft. Poor picture quality, sorry.
- Thread starter KD Cannon
- Start date
Red Dave
Well-known Member
It appears that you have a PTO. The picture is not clear on whether you also have a belt pulley. Many mowers use the belt pulley drive (with the pulley removed) to power the mower.
The belt pulley is at a right angle to the PTO, just above the PTO, kind of below the seat. That may be what you have seen on other tractors.
If you need one, I would expect that one could be obtained from a salvage yard. You would probably need the entire PTO assembly from the transmission back.
The belt pulley is at a right angle to the PTO, just above the PTO, kind of below the seat. That may be what you have seen on other tractors.
If you need one, I would expect that one could be obtained from a salvage yard. You would probably need the entire PTO assembly from the transmission back.
old
Well-known Member
- Location
- Camdenton Missouri
If it is for a cub it WILL NOT fit an A. Cub PTO turns backwards of what an As does plus the cub has more splines and finer splines so nope will not work
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy