IHalltheway
New User
Hi guys my A ser# makes it a 42 has the deleate cover over were the pump went on the font right of the block. I can't read the motor ser# Did they have that option on the 42's
- Thread starter IHalltheway
- Start date
Dave from Texas
Member
I have never seen an A with factory hydraulics. The Super's have hydraulics. I am surprised there is a place for a pump and a cover. Is it the orginal motor. I have a Cub that way but my A does not.
ScottyHOMeY
Well-known Member
Way too early. Sounds like a replacement block/motor somewhere along the line.
along with the port for the hydro pump on the block, the torque tube that even allowed you to mount the hydraulic block didn't come along until the Supers.
along with the port for the hydro pump on the block, the torque tube that even allowed you to mount the hydraulic block didn't come along until the Supers.
IHalltheway
New User
So is this a super A block or motor? Could this be why the tin doesn't fit right? Hope the picture came through.[/img]
Zach Bouchard
Member
My B, which is pretty much the same has a Super A or C block and the tin fits. Mine works fine and I have the delete plate. Other than the plate there you would never know it.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy