806 spindle

Anonymous-0 · Nov 29, 2009

Need some help. A front spindle broke on our Farmall 806 wide front. I have ordered two through ebay and neither is right. Any suggestions?

bbelltn · Nov 29, 2009

Some 806 tractors might have been tricycle front originally and have been changed to an aftermarket front end. Swartz made a lot of these.My guess is that either you have an aftermarket front or you bought aftermarket spindles. Also you could hve an 856 front.

the tractor vet · Nov 29, 2009

i would have to see what ft. end you had to tell you what you need

rustyfarmall · Nov 30, 2009

There were three aftermarket companies that made wide fronts as well as the factory IH. The aftermarket companies are Schwartz, Speeco, and Norden. Speeco was bought out by Schwartz, and Schwartz is still in business, so any Schwartz part is readily available and SOME Speeco parts can still be bought. Norden is pretty much defunct, but the tie rods from a Schwartz MIGHT interchange.

Michael Locher · Nov 30, 2009

i have two spindles hubs and just pulled out of the tube take a $100.00 for both

806 spindle

Anonymous-0

Well-known Member

bbelltn

New User

the tractor vet

Well-known Member

rustyfarmall

Well-known Member

Michael Locher

New User

Similar threads