stacks are on the dual exhaust M

Here is the M with some stacks on it. Made it sound different. I was hopeing the sound would be a little better...but its not. I was out enjoying it in the cold misting weather!
a6020.jpg

Untitled URL Link
 
When humans walk into a room full of folding chairs to sit, the first thing they do is move the chair they will sit in, making it theirs. I think personalization of a machine is just fine. I would run glasspack liners inside those to mellow the bellow, but I like them a lot. JimN
 
I disagree with you guys, what do you do with your free time? Looks like his use of free time is better than most.

Also, a couple of spot welds and bondo and you would never know there was a hole cut in it.
 
(quoted from post at 08:39:48 10/14/09) I disagree with you guys, what do you do with your free time? Looks like his use of free time is better than most.

Also, a couple of spot welds and bondo and you would never know there was a hole cut in it.

Exactly!! Even an amateur body repair man could make that hood look good again. Really is no different than repairing a roached out original exhaust hole.
 
Thank you guys for the good comments. And I tell ya what for those of you who don't like it... thats fine, I reckon you guys just don't have the ingenuity that it takes to become creative! Besides, I belive it adds alot of class and personalization to a machine.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top