Need help finding farmall H parts.

Anonymous-0 · May 21, 2009

Does anyone know where I can locate a gasket set for the governor? I also need the seals that go behind the brakes and the seal on the rearend drive shaft near the throwout assembly.

Brent R. Weaver · May 21, 2009

I justed ordered all that from mother case IH today, it will be in tomorrow. I checked all over and couldn't find anyone carrying them.

Roy Ward · May 21, 2009

If you have an independent auto parts store not a chain parts store and you have the IH part numbers they can cross them. I did that and it didn't cost me an arm and leg. About 1/3 to 1/2 less. Most of the seals IH used are National seals.

Brad in WI · May 21, 2009

call your local case IH dealer just to get a price if nothing else. sometimes they are not so outrageous on their prices. Or at least my dealer is not. You can go onto CIH parts page and even look up the part numbers and then call and tell them the part numbers.

Andy Motteberg · May 21, 2009

CaseIH Dealer.

r4etired · May 22, 2009

CIH charged me 62 bucks for the 2 O rings that go on the brake shaft bearing cage. Checked later at NAPA they were 24 bucks. Always pays to shop.

Need help finding farmall H parts.

Anonymous-0

Well-known Member

Brent R. Weaver

Member

Roy Ward

Member

Brad in WI

Member

Andy Motteberg

Well-known Member

r4etired

Member

Similar threads