806 Power steering

MAK

New User
Hello can anyone assist me with a problem I am having with an 806?
I had a seal blowout and lost the hydotrans fluid refilled case but now I can't get the steering or brakes to work the hand pump still turns the but the wheels power part will not assist I split the tractor and replaced the seals but now can not get the pump to prime or I give up anyone have any Ideas![/b]
 
If you look at the pump on the left side of the tractor you will see where the power steering lines bolt to it. Just below those you will see a plug. pull it out start the tractor and be ready to shut it off when fluid comes out. put the plug back in and restart it. all the thing not working should be. If it doesnt prime make sure the seal on your filter cover isnt ripped.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top