clutch free play adjustments on a H

binder dude · May 2, 2009

I know this might be a dumb question but how much free play is there supposed to be? After putting a new engine in my tractor then reinstalling my clutch/flywheel I only have about 3/8 of a inch of free play. I don't know how much was in it when it was taken apart because I bought it apart. If i turn the linkage in (shorter) will it give me more play? I only have about 3and 1/2 threads left on it behind the nut so i'm thinking that i should go all in and seeing. Thanks in advance.

Andrew Z · May 2, 2009

there should be 1 1/8" of free pedal travel.

Andrew

williamf · May 2, 2009

And yes, you shorten the linkage to get more play.
Good luck, Wm

binder dude · May 3, 2009

Thanks, I adjusted it out all the way today and the most I can get is 3/4 of an inch of play. This should be good enough though for now, then when it wears it will get more.

clutch free play adjustments on a H

binder dude

Member

Andrew Z

Well-known Member

williamf

Member

binder dude

Member

Similar threads