super a head

mtivester · Sep 2, 2008

I took the head and the block of my super a to the machine shop. The rocker arm assembly was off and did not go to the shop. When I got them back, there were to small studs in a box, the box was with the head, I think they are 1/4-28. I can"t find a place for them anywhere. Does anyone know where they go. Thanks Mark.

Andy Motteberg · Sep 2, 2008

Call your machine shop and ask, if they put them in with the head, they should know what they are for.

mtivester · Sep 2, 2008

Been working on other things, The heads been back from the shop about a year, I doubt they remember

CNKS · Sep 2, 2008

Valve cover is held on by two long studs, manifold also uses studs. Otherwise I don't know.

teddy52food · Sep 2, 2008

I think they are for someone elses project.

ScottyHOMeY · Sep 2, 2008

I'm kinda with Tedy. I don't think they're yours.

If they were 3/8 NF (24) I'd think they were the outside studs for your rocker assembly that double for holding down the valve cover. 1/4-28 sounds like you're pretty much sure of what they are, and there ain't anyting like that on a 113/123 head.

I once had a shop lose all eight of the push rods for my SuperC. All I can say about that is that spare parts are better than lost parts, except that the parts you now have for spares are probably somebody else's lost parts. 8^(

super a head

mtivester

New User

Andy Motteberg

Well-known Member

mtivester

New User

CNKS

Well-known Member

teddy52food

Well-known Member

ScottyHOMeY

Well-known Member

Similar threads