Safety Issue

PRTZMAN55

Member
Morning All,
I hope someone might be able to help me
as this is a litte off topic and maybe the wrong
board .But I trust that someone has some info tohelp me.
I have a 1816b Case Uniloader, I got most of the bugs worked out of it now(it has been sitting a while).
Anyway this machine wants to go all the time weather the belt lever is engauged or not.
even when you try to start it. This is scary.
and it wont always stop like if you loading a
truck (could smash the side in ).Any ideas ????
thanks
Harry
 
Check your manual it should tell how to adjust the clutches.

From what you have said I assume it has some form of clutch and is not hydrostatic.

Gary
 
Thanks,
I guess it would be hydrostattic,
chain drive ,levers operate forward and revrse
and lift and bucket too.
Works like the NH 170 we rented only bucket op was on floor pedals.
Bucket operates anytime ,drive work when you pull drive lever up but you need to push lever down quick sometime to stop
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top