f12 axle gear for mounted plow

Chuck Matthews · Mar 18, 2009

Does anyone know where I can get an axle gear for an f12 mounted plow. I have the plow but no gear. It's a two part gear that is bolted around tghe axle. Thank you

Anonymous-0 · Mar 18, 2009

I know which gear you are talking about. You might try the Implement Alley board on this site, check with some salvage yards, or as a last resort, if you could find a gear that you could borrow to make a mold from, you might be able to have one cast at a foundry.

Rob Myhren · Mar 19, 2009

I have the rear end of F-14 or 12. It does have the gear you are talking about. I always wondered what it was for until I saw a picture of it. You can email me if you want to see some pictures of it.

Chuck Matthews · Mar 19, 2009

I would like to see if it is the right gear.If it is would you be willing to part with it?

Rob Myhren · Mar 21, 2009

sure, its been behind my dads house for 25 years. How big of a project is it to take it off? I still have about a foot and a half of snow on the ground, so it wouldn't be for awhile

Chuck Matthews · Mar 21, 2009

I belive there is only two bolts that hold it on the axle. It comes apart in two pieces.Let me know how much and when you will get to it.You can email me at [email protected].

f12 axle gear for mounted plow

Chuck Matthews

New User

Anonymous-0

Well-known Member

Rob Myhren

Member

Chuck Matthews

New User

Rob Myhren

Member

Chuck Matthews

New User

Similar threads