Farmall M live hydraulics

I?m steadily building my motor for my M and have a live
hydraulic pump waiting to go on. There is a show I?m trying to
make with it and don?t have time to add the lines and plumb
the belly pump and all that my question is would it hurt
anything to block both ports on the pump and run the engine
like that or would that cause any problems?
 
DO NOT run that tractor without oil in that pump. Take the time to plumb it. There will always be another show.
 
Agree with the others, do NOT block the ports, and do NOT run dry.

Make sure you crack a fitting loose at the top of the pump when you fill up with oil and let the air out and fluid into pump.
 
You could run a temporary hose from outlet to inlet and fill the pump. all other ideas other than plumbing it to the reservoir and valve will be costly! Jim
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top