Some of you may recall my post last week when I lost a wrench in the rearend of my 560. I pulled the pto assembly out and there it was. Got
the gears all lined up again and put it all back together,but now the pto is out of whack. Runs non-stop. Thought I had everything lined up right.
It went back together fairly easy. Can I adjust it by changing the position of the arm on the side of the unit?
the gears all lined up again and put it all back together,but now the pto is out of whack. Runs non-stop. Thought I had everything lined up right.
It went back together fairly easy. Can I adjust it by changing the position of the arm on the side of the unit?