Rocker arm assembly

dcpky · Mar 14, 2018

Hey guy haven't had this tractor long it is a Super A
somebody was pretty rough on it any way I liked to
never got assembly off but did studs where rough
and bent ordered new ones from dealer what do I
do if new studs are tight when I slide rocker
assembly down don't want to do like po did and
beat the hell out of Thanks for help

fastfarmall · Mar 14, 2018

It should fit,pretty nice, but the rocker's get's it's oil from the middle bolt so don't forget about that aspect. The middle bolt has a hole in the center to supply the oil, then another hole horizontally!

gene bender · Mar 14, 2018

there is a place on the shaft that has a spot if turned correct for the two studs to clear

Haas · Mar 15, 2018

As gene said, very important to make sure the rocker shaft is turned so the notches in the shaft are lined up to clear the stud bolts. I had a tractor that someone before me had forced the rocker assembly on with the notches not lined up. It was quite challenge to get the rocker assembly off. I had to buy new studs.

Rocker arm assembly

dcpky

Member

fastfarmall

Well-known Member

gene bender

Well-known Member

Haas

Well-known Member

Similar threads