Thomas Cooke
New User
The only issue i had with mounting a cab on my Super c for winter work is the location of the top link for my three point
hitch that bolts up inside the tool box/seat pedestal. It needs to lower down almost 9 inches below the floor platform so
my steel bi-fold door can be mounted on the back of the cab. Does anyone know of a bracket and a location to remount the
top link? I Was thinking about the two holes that hold the PTO Shroud that are in the top of the belt drive housing but
i'm not sure if that would put too much pressure on the housing or not. Any ideas out there? Thanks fellas and Have a
Happy and healthy New Years.
hitch that bolts up inside the tool box/seat pedestal. It needs to lower down almost 9 inches below the floor platform so
my steel bi-fold door can be mounted on the back of the cab. Does anyone know of a bracket and a location to remount the
top link? I Was thinking about the two holes that hold the PTO Shroud that are in the top of the belt drive housing but
i'm not sure if that would put too much pressure on the housing or not. Any ideas out there? Thanks fellas and Have a
Happy and healthy New Years.