Ih 650

1974vette · Dec 26, 2017

Good morning and merry christmas. Im working on a 650 ih with some leaky seals. I have tried my local ih parts dept with no luck. Im hoping
Someone can help me out.the axel seal for the 650 is 363 245 R91 swd9 part number is 58 423D either will work i think. Break shaft part number is 359 813 R91 im hoping someone has replaced these and has current or a cross reference number for me. Any help or ideas are appreciated. Thanks
Joel

Phil Tibbetts · Dec 26, 2017

Take the old seals to good bearing supply house and they can probably match them up. If you have the number off the old seals I may be able to cross reference them for you.

Bob · Dec 26, 2017

As to the seals, leave out the spaces.

Both 363245R91 or 58423D cross to SKF 43691 or 43762.
Source

1974vette · Dec 26, 2017

Thank you. I put the part numbers on the post the same way they are in the parts manual. Any ideas on part number
359813R91?
Thanks again. Skf can be purchased at a napa?

rustyfarmall · Dec 26, 2017

(quoted from post at 12:42:14 12/26/17) Thank you. I put the part numbers on the post the same way they are in the parts manual. Any ideas on part number
359813R91?
Thanks again. Skf can be purchased at a napa?

NAPA may or may not have them on the shelf, but I'll bet they can order them.

sflem849 · Dec 26, 2017

(quoted from post at 12:42:14 12/26/17) Thank you. I put the part numbers on the post the same way they are in the parts manual. Any ideas on part number
359813R91?
Thanks again. Skf can be purchased at a napa?

Here is a Timken.
https://www.amazon.com/Timken-450869-Seal/dp/B00460IUY8

When I am looking for seals I just type the IH number into Google. It will bring up all kinds of sources and cross references. BUT I always double check their dimensions to the actual part.

1974vette · Dec 26, 2017

Thank you all. I found your advice very helpful. I always try to give my local parts people my business but at times i need other sources.
Thanks again.

sflem849 · Dec 27, 2017

(quoted from post at 18:12:20 12/26/17) Thank you all. I found your advice very helpful. I always try to give my local parts people my business but at times i need other sources.
Thanks again.

If you want to buy local there are plenty of options. I would start with Wisconsin Bearing/Motion Industries over in Sheboygan. They are at 3669 Enterprise Dr, Sheboygan, WI 53083, (920) 208-5600

If you want to run down to Germantown, I have had great luck at Bearings, Inc.

Ih 650

1974vette

Member

Phil Tibbetts

Well-known Member

Bob

Well-known Member

1974vette

Member

rustyfarmall

Well-known Member

sflem849

Well-known Member

1974vette

Member

sflem849

Well-known Member

Similar threads