pinball

Well-known Member
working on an international 404 and a 300. some of my caged nuts needs to be replaced. I have been around town and no one has them. I have found several on ebay but I am not sure the size I need. I know the square hole I approx. 1/2 inch but they don't give that on there listing. so does anyone know the sizes that were used on these tractors. I see a 5/16x18 but that seems small that are listed. quite a bit higher for tractors than cars. not sure why. Any help appreciated . Thanks Norm.
 
-pinball; you are correct on the size. 363885R91TW is the part number shown on page 22 of the Pilot Knob Restoration book. Good for Cub through your series and beyond. I got an order from them ~ two weeks ago and was happy with their service. The five hole per inch grille screen will look good on my F-340.
 
The 5/16 size is correct. That is the thread size.Look inside the 'cage'. There is a common square 5/16 threaded nut.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top