unclemerle
Member
Hey everyone. Picked up an M from a friend and would like to get it running and paint it for parades and tractor pulls. Got it in the shop and drained the fluids today and this is what I found. 1. Pulled the oil plug and about a quart of clear water came oil and then black oil that smelled like a sewer. Oil filter was rusty and gross, vacuumed out the base and cleaned up pretty good. Is there a spin on adapter for it? 2. Radiator had been drained and went to drain the block it was full of anti freeze. 3. Hyd oil looked good and smelled normal. 4. Rear end had about half a gallon clear water and then what looked like tar in it. Any pointers will be appreciated. Thanks in advance