I'm working on a mid mount mower on a farmall cub. Got it hooked up and the belt on but now it is very difficult to engage the pto. If I open the oil filler I can push the pto into gear with a screwdriver
but it won't go with just the lever... The pto engaged normally before the belt and mower were attached. Any ideas for a fix? I'm guessing worn parts but it looks like a little bit of a job to take the
whole thing apart.
but it won't go with just the lever... The pto engaged normally before the belt and mower were attached. Any ideas for a fix? I'm guessing worn parts but it looks like a little bit of a job to take the
whole thing apart.