Farmall front cultivators mechanism

walshgj

New User
This message is a reply to an archived post by Mark Capps on July 17, 2012 at 06:16:07.
The original subject was "Farmall front cultivators mechanism".



Hi guys!!!

I just got a set of front cultivators onto my Super C. They work great. Only catch - the right hand control lever won't stay firmly in the up position. So I need to keep my hand on the lever (or, after about 30 seconds of driving, the cultivators are working my ground). Any ideas on how to fix this? THANKS to all!
 
If you look at the control lever you will see some washers where is pivots on a double nutted shaft loosen up the out side nit as it is a lock nut then tighten up the inside nut to get desired tension. Mite need to rep[lace the disc that provides the tension.The cover will snap off to see the workings.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top