I am rebuilding a Farmall SMTA engine. The head was cracked in 13 places, so I decided to spend the money and buy a LP Head from Bates Corporation. According to their site and others that sell this head, they state: "The head will bolt right on to the SMTA engine." I am ready to install the head and the breather tube from the old head goes over the valves and screws in on both sides of the head. On this LP head, there is a place on one side of the head, but not on the other side for the tube to connect into. Has anyone ever installed an LP Head on a SMTA gas engine or can anyone provide me with a contact(s) to ask? I will be contacting Bates to see what they have to say. Thanks for any help!
David
David