char lynn power steering

I"m looking for pictures of a char lynn power steering mounted on a super md and the mounting bracket And if anyone has one for sale to fit a md
 
45532.jpg


I should've taken more pictures of it. I removed the live hydraulics and power steering from this tractor (for now) because its mainly used for tractor pulls and pulling a double bottom trip plow and pulling hay rides.
Sorry, stuff isn't for sale, never going to get rid of that stuff. But hopefully the picture helps.
 
You might put an add, wanted type on the classifieds here, I got my torque multiplier that way, got other parts from Ebay, Steiner and Bates when I put one on a SMTA a couple years ago. A couple guys here sent me copies of original install manual and one of the other suppliers above had a manual. I use my tractor hydraulic pump to run it through a priority valve.
 
Stub shaft goes on rear of char lynn to rear steering shaft. Throttle and steering support casting is sawed off above the mounting bolts. Char lynn bolts to front of U shaped bracket.
a151347.jpg
 
DSlater has the proper bracket and parts needed for mounting the orbit motor, however they can be very hard to find for a diesel. The power steering bracket used on a gas tractor is completely different. Good luck Jim.
 
I parted out a 450 Diesel a few years back and I took a few pictures of the power steering unit before I disassembled. I think I still have the mounting bracket if I can find it.

45586.jpg
45587.jpg
 
Same bracket works on a 400 and 450 gas and diesel, different than that one. Must have used that from another tractor.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top