IH (I think) Tractor Parts ID

Sparky70

Member
Would someone know what these older parts are used for, thanks.
43029.jpg
43030.jpg
[/img]
 
In the second pic I can see a wrench for tightening the implement mounting bolts on a Farmall C/SC, and what looks like link arms that go between the touch control lift arms and the rear implements,
 
(quoted from post at 16:33:30 12/03/16) In the second pic I can see a wrench for tightening the implement mounting bolts on a Farmall C/SC, and what looks like link arms that go between the touch control lift arms and the rear implements,

Well I have Dads old SC, but not implements. These will be redundant for me. thanks
 
(quoted from post at 16:37:34 12/03/16) 2nd pic. long crank type socket wrench on wall is for rear drawbar/cultivator sweeps on H M ect.

well is have a M, H and super C, but no implements, will keep it in mind. thanks
 

Worth very little as scrap. There is some collector interest, but if they were mine, I would just hang them up and display.
 
(quoted from post at 00:00:01 12/04/16)
Worth very little as scrap. There is some collector interest, but if they were mine, I would just hang them up and display.

Thats a good idea and best of all I have the room, thanks
 
That what I was going to say. Next door neighbor has one and a couple of guys have them at some of the summer shows. They show people how it will pop all of the kernels off and hand them the cob to take home. Photo loaded. Several shellers of different size.
a244447.jpg
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top