Last IH with a belt pulley

You could get a pto mount on the 06 series from what i can remember.
I have one that fits a 4020 Deere, some folks still bought em late for
silage blowers, etc.
 
far as i know its the 560 and 660 series tractors that had the last side mounted belt pulleys, so that would put it back to 1963.
 
766 and 966. I have one that I need to reseal. It's a heavy right angle gearbox that bolts onto the back of the PTO housing. It's driven by the 1000rpm shaft. They are not listed under 10,14,1566 for one the 14 and 15 had factory 1000 only so nowhere to bolt it to. Also I think because they were rated at to much horsepower for the gearbox.
 
Yep, they had a rear mount PTO drive pulley set up for the '06 series tractors, not sure about the '56's and later ones
 
My 56 series manuals show an optional belt pulley gearbox.

Since the PTO units are essentially the same up through the 86 series, you could also use them on those tractors as well.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top