In recently asked how to get the 6v generator on my A to charge at a lower RPM and one of the answers was to move the 3rd brush.Right now I have to have the tractor running wide open to get it to charge. So my
question is how do I do that. The generator says Dixie electric on it so I don't know if they made it or re manufactured it. I bought it from NAPA. Which brush is the third brush (I'm thinking middle one),
which way should it move - toward tractor or away and how do I move it. I don't see any screws that would let me move any brushes.There are no screws on the end cap like I've read for some generators.
question is how do I do that. The generator says Dixie electric on it so I don't know if they made it or re manufactured it. I bought it from NAPA. Which brush is the third brush (I'm thinking middle one),
which way should it move - toward tractor or away and how do I move it. I don't see any screws that would let me move any brushes.There are no screws on the end cap like I've read for some generators.