F20 rear wheel sizes

IA Roy

Well-known Member
If I remember correctly, some F20's had rear wheels/tires about 24" diameter and some had 38" diameter wheels. Was there a year break over, or am I imagining things? Please fill me in?
Thanks, Roy
 
(quoted from post at 17:25:10 08/31/16) If I remember correctly, some F20's had rear wheels/tires about 24" diameter and some had 38" diameter wheels. Was there a year break over, or am I imagining things? Please fill me in?
Thanks, Roy

28" or 36" were the options, there was no year break.
 
the 24s were made from the steel and cut to fit a 24in rim gave the 20 much more pulling power going to the smaller tires.Neighbor pulled 3-14s in good black soil with 24s.
 
(quoted from post at 16:33:56 08/31/16)
(quoted from post at 17:25:10 08/31/16) If I remember correctly, some F20's had rear wheels/tires about 24" diameter and some had 38" diameter wheels. Was there a year break over, or am I imagining things? Please fill me in?
Thanks, Roy

28" or 36" were the options, there was no year break.

24" too Kirk
 

IH first request of French and Hecht was for 24"x8",28"x8",36"x6", and 36"x8" one piece rims with round spokes.
 
f20.2%202_zpsy9e6jkkd.jpg
 
Thanks for the information. If the gearing was the same on all, the smaller tires would give more pulling power at a slower speed if the wheel slippage was the same.
 
Very interesting info. Is there any info out there on what size factory duals were? Next door neighbor bought a new F 20 that had factory duals. Only one that I had seen for many yrs. This F 20 was used for general dairy farm work in north east Ill. Nothing special as to uses. clint
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top