400 hydra touch

pete37997 · Aug 20, 2016

Does anyone have valve parts they are willing to sell? Specifically, the bottom plates on the valves. I have one that's bowed and leaks. Any suggestions would be greatly appreciated!

Janicholson · Aug 20, 2016

If the warp is ~.010" it probably can be flat sanded on a piece of glass. Use 150 grit wet or dry, then 240, then 400 grit. Jim

pete37997 · Aug 21, 2016

(quoted from post at 19:51:29 08/20/16) If the warp is ~.010" it probably can be flat sanded on a piece of glass. Use 150 grit wet or dry, then 240, then 400 grit. Jim

Thanks!

400 hydra touch

pete37997

New User

Janicholson

Well-known Member

pete37997

New User

Similar threads