help w/decal placement on A model

burrpenick · Aug 19, 2016

Where does the 'OPEN >' go?

How about the 'Hitch only to drawbar or front pull hook and not to tractor'?

Finally, the O D B..........I believe it goes on the gauge and knob box right in front of the driver' specifically beside the alum KNOB, but does it attach to the LEFT of that knob in a veretical position?

George in NC...........getting close!

gene bender · Aug 19, 2016

Open is for the shutters and if you dont have them dont use it. If you have a regulator you use the ODM on the left in vert position. If you still have the FOUR position control you use the four position decal still on the left vert position. You said A as it came with cut-out but mite have been changed to a regulator. Hitch only to drawbar goes on the back of the seat. The pull only from front is not original and not used. Some decal sets have decals that are not original just like gear selection as its stamped in the cast on the tranny.

burrpenick · Aug 19, 2016

Thanks, I finally found out the ODB for for the light switch- off/dim/bright. I have no shutters so the open wont be used; the dont tow sticker has both front and back worning, so I'll put it on the seat anyway. THANKS!

help w/decal placement on A model

burrpenick

Member

gene bender

Well-known Member

burrpenick

Member

Similar threads