need photo of hand levers for Farmall A

Pembroke · Jul 30, 2016

I have a hand lever for Farmall A and don't know if it's all here. A photo of one laid out would be nice if possible. Thanks. Pembroke

gene bender · Jul 30, 2016

There at least 5 levers that i can thinkn of that were used on a A Farmall different implements ect so your lever could be anyone of those you will need a pic of yours in good detail so it can be identified as to what and where it would have been mounted.

Pembroke · Jul 30, 2016

I believe it was for a plow on the Farmall A. Pembroke

gene bender · Jul 31, 2016

so where does it mount as the plow used two levers one mounted on the drivers platform and the depth lever mounts near the starter on the bell housing. So if thats the two levers you have it is not hard to tell where they mount and what would be missing.

Pembroke · Jul 31, 2016

I believe mine goes on next to starter and controls pitch on the front of plow. Not sure about any of this as I have a Super A with hydraulics. Thus the need of a photo. Pembroke

gene bender · Jul 31, 2016

That lever should be complete there is linkage that goes on the "pin" hooks to the plow beam where there is a wishbone type bracket that fastens to the steering sector but not part of the lever.

need photo of hand levers for Farmall A

Pembroke

Member

gene bender

Well-known Member

Pembroke

Member

gene bender

Well-known Member

Pembroke

Member

gene bender

Well-known Member

Similar threads