484 starter switch wires

RBPrice

Member
I just got an Intl. 484 which started fine when I got it from the auction site. Today it would not start and so I did so checking. The clutch switch and wiring seemed to be OK, the battery was fully charged, and occasionally when I turned the switch the power on light would come on.

Some more checking indicated that the key/starter switch wasn't working so I went and got a new one. When I was removing the console cover some of the wires pulled off the old switch.

There are six wires & terminals. Two white, two red, a black/red and a green which doesn't seem to have been connected to anything. The two white are where they belong but the others I'm not sure about.

I have ordered some manuals but they won't get here for two more weeks.

Does anyone have a pictorial diagram of the wires on the back of the switch showing where they are supposed to go.

This switch is the same for an IH 354, 454,464, 574 584, 674, 684, 784.

Some help would be very much apppreciated.

Thanks

Bob Price 518.895.8954
 
Hi Bob,
I have picture of wiring diagram from the 684 Operators manual but is not easy to make sense of it. Must be in some kind of British wiring code.

The best one was from our 454 Operators manual but Dad lent it to a neighbour, neighbour past away suddenly and no one knew where the manual had been stored.

Uncover your email and I will email the couple pages I have.

JimB
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top