PretendFarmer
Well-known Member
MY 1944 H has a Wico XHD magneto. It doesn't run right. When its running, it is only getting spark on cylinder 1 and intermittently on 2 with nothing on cylinders 3 and 4. If I unplug #1, it will then fire normally on cylinders 2,3 and 4.
I've cleaned up the cap. Rotor looks good. Adjusted the points gap to .020". And replaced the condenser with a FM200 condenser from Napa.
It would cost over $200 to have the mag rebuilt. Id rather not spend that kind of money. Any ideas?
I've cleaned up the cap. Rotor looks good. Adjusted the points gap to .020". And replaced the condenser with a FM200 condenser from Napa.
It would cost over $200 to have the mag rebuilt. Id rather not spend that kind of money. Any ideas?