Update on our M's.

txdutchman · Apr 7, 2016

Been a little while since last posting an update on the M's.
Been busy but have been able to spend a little time working on our tractors.
Pulled the head and pan of the second tractor. Found a loose rod so we pulled the pistons. Crank is still hard to turn so it may still have other issues.
Waiting to get a hoist/ cherry picker so we can pull the engine out

Started a little work on the first one. Went ahead and pulled the head the other day. Still have to pull the pan on it but the cylinder walls look very good on it.

Here is the address to my pictures of our progress so far:
http://ImageEvent.com/texasdutchman/farmallproject

txdutchman · Apr 8, 2016

I can't see anything here unless I switch to classic view. Can anyone else see this post?

John M · Apr 8, 2016

Link doesnt work either. But I see the post on classic.

CenTex Farmall · Apr 10, 2016

I get an error on the link but the post is there. I use classic view.

Jim Becker · Apr 10, 2016

Usually, a missing post in modern view is because the poster used some banned word. But then, the whole post disappears, you don't get an empty post. Maybe it has to do with the bad photo link. try this one:

http://imageevent.com/texasdutchman/farmallproject

txdutchman · Apr 10, 2016

Not sure what banned word I might have used if any. I didn't know there were words banned other then probably cuss words and I don't use them.

Jim Becker · Apr 10, 2016

I didn't see anything in your post that looked like a Modern View problem to me. The banned words are cuss words, the names of some other vendors and links to some sites. Links may not be a problem if not bracketed by URL tags.

Update on our M's.

txdutchman

Member

txdutchman

Member

John M

Well-known Member

CenTex Farmall

Well-known Member

Jim Becker

Well-known Member

txdutchman

Member

Jim Becker

Well-known Member

Similar threads