D2 4U Track Master Pin

OzCat · Sep 24, 2012

Does anyone know of the availability of a Track Master Pin to suit a D2 4U?

Required is the master pin, two plugs, two cork plugs, two collars and the short bushing.

I'd also be interested in the Master Pin with a small and a large pin.

Thanks John

dpendzic · Sep 24, 2012

I recently bought 2 new master pins from Cat for my 4U. the new ones are one straight diameter without the tapered plugs on the ends. They were about $11 each.

OzCat · Sep 26, 2012

(quoted from post at 06:39:30 09/24/12) I recently bought 2 new master pins from Cat for my 4U. the new ones are one straight diameter without the tapered plugs on the ends. They were about $11 each.

Thanks for your response.

I guess they expect you to weld them in place?

Cat supplied the plugs and the corks a standard bushing, which is unsuitable-too long, two collars and the pin with no provision for the plugs.

When I emailed them for information and advice their response was to flick the question back to their agent who supplied the parts, what a waste of my time and the agents.

dpendzic · Sep 26, 2012

The new pins are a tight fit so you just pound them in. Yes--they still have the plugs and corks for the old style pins but don't have the old pins. Just like you i have new plugs and corks but had to destroy the old pins to get them out

D2 4U Track Master Pin

OzCat

New User

dpendzic

Well-known Member

OzCat

New User

dpendzic

Well-known Member

Similar threads