|
| |
| Crawlers, Dozers, Loaders & Backhoes Discussion Forum |
Topic: D717A liners stuck
[Return to Forum]
| Author |
[Modern View]
|
| Cat u9u9
09-22-2012 10:17:27
166.147.72.24
|
Got it out
Got out the head bolts
Now got to clean her up
Get the head flat small bolt studs threads r pulled
Up out the block got to get her flat
The water passages r the problem
One is washed out a little I was going to
Fix it with j b weld an powder metal
Grind her smooth any idea
|
|
[Reply] [No Email] | |
| Bob/Ont
09-22-2012 15:18:24
65.93.177.127
|
|
Re: D717A liners stuck in reply to Cat u9u9, 09-22-2012 10:17:27
|
| 9U, just clean everything up and take some pic's of the top of the block if you can. You will need a liner puller once you get the pistons out. Get the liner puller hooked up and then apply steady pressure, once it breaks loose it will move nice. Now with the pistons out get a piece of cardboard that just fits between the block webs, coat with grease and it will catch all dirt when you pull liners. put in all 4 spots.
Later Bob
|
[Reply] [No Email] | |
| Cat u9 u9
09-22-2012 15:25:03
166.147.72.17
|
|
Re: D717A liners stuck in reply to Bob/Ont, 09-22-2012 15:18:24
|
| I had trouble with two liners but got them out
Now just have to get the block flat
Around one water passage it's kind of washed
Out I need to build it up
|
[Reply] [No Email] | |
| Bob/Ont
09-22-2012 18:01:26
65.93.177.127
|
|
Re: D717A liners stuck in reply to Cat u9 u9, 09-22-2012 15:25:03
|
| You should have ferrels and grommets at all of the water holes.
Later Bob
|
[Reply] [No Email] | |
| Cat u9 u9
09-23-2012 13:03:00
76.250.157.220
|
|
Re: D717A liners stuck in reply to Bob/Ont, 09-22-2012 18:01:26
|
| Yes it does have bass Ferrells
With an o ring
|
[Reply] [No Email] | |
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|
