Fiat-Allis track parts

Just bought this 1980 14C and I am needing some new pads (grousers). Any idea where to locate some near KY? No, I don't want to convert it to Cat. My rails are almost new.

2-1.jpg
 
Good luck, We finally scrapped our 14C when we couldn't find pins, bushings and sprockets.
Ron
 
I would suggest taking measurements of the pads. Width, bolt pattern, and bolt size, then contact Berco or Valuepart or one of their dealers and see what they can do. May not be able to help with AC but pattern may be the same as something else. A lot of major equipment dealers are also dealers for the above.
good luck
Dennis
 
I have a buddy who is a heavy equipment mechanic and we looked the pads up in his books. They only match up to a couple of different Fiat dozers. Cat and others are different.
 
I need help adjusting the steering clutch on my 14c. Do you know how to do this? I also need a shop manual for it. I saw your post online and hope you can help me out.
 
I need help adjusting the steering clutch on my 14c. Do you know how to do this? I also need a shop manual for it. I saw your post online and hope you can help me out.
Phone is 330-227-3124 in Ohio
 
I haven't had to adjust the steering clutches so I don't know the procedure, but I do have the service manual.

I am having to rebuild the transmission in mine right now. The clutches are slipping under full load.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top