Case 310 sprocket socket

Steve Hartwig · Jun 12, 2012

Will this be strong enough? Should weld right in. Should a keyway be cut into it?

AJ. · Jun 15, 2012

I would weld them straight in, watch out for shrinkage,if you have a spare shaft it would be a good idea to have it in the new hub when you weld it in.
AJ

Larry H · Aug 13, 2012

Hi I need to do the same thing. I have the machining capability but have been unable to find the sockets can you tell me where you found then. Thanks

Anonymous-0 · Aug 30, 2012

I also would like to do this repair. Are these splined couplers ? were did you get them? any help would be greatly appriciated.

Steve Hartwig · Aug 30, 2012

Well I had a machinist make them. He bored out the old splines and pressed the sockets in. They still need to be welded in place. Machinery spare parts, is the buisness and Dan Renfrow is the man. He did four sprockets and four sockets for 1000.00. His phone is 816-254-5156.

Case 310 sprocket socket

Steve Hartwig

Member

AJ.

Well-known Member

Larry H

New User

Anonymous-0

Well-known Member

Steve Hartwig

Member

Similar threads