HD 6G Hydraulic

wayne in texas · Apr 18, 2012

I broke the hydraulic line that goes from the pump (I think it across back of engine to left side of motor???) to the hydraulic control box on right side of operators platform. Since I can't lift the loader my view is limited, I can't see where the line bolts to the pump. Has anyone replaced this line and if so is it something that I have to get under the loader and remove the shield to access/replace?

If anyone has suggestions on how to replace the line I would appreciate any advice.

TIA
Wayne

Anonymous-0 · Apr 18, 2012

The left side hose is bolt with 4 capscrews 1/2"and flange and with the front bottom grill removed and remove the belly pan becase the hose should have 5 or 6 clamps to the frame

wayne in texas · Apr 21, 2012

Thanks -- I had to cut the 4 bolts that held the front bracket but, it was exactly as you stated thanks!

HD 6G Hydraulic

wayne in texas

New User

Anonymous-0

Well-known Member

wayne in texas

New User

Similar threads