|
| |
| Crawlers, Dozers, Loaders & Backhoes Discussion Forum |
Topic: Re: Oliver oc6-68-G
[Show Entire Topic] [Return to Forum]
| Author |
[Modern View]
|
| J. Schwiebert
04-14-2012 12:45:23
209.143.54.241
|
In the last several years I have had 2 people call me with the same problem. If your tractor has a PTO it needs to come out (9 3/8 inch bolt total). However neither one of those 2 tractors had a PTO so the complete top had to come off and the snap ring and hydraulic pump drive shaft had to be removed first. More questions? J.
|
|
|
| CHARLIE K SENIOR
04-16-2012 20:23:37
68.248.238.55
|
|
Re: Oliver oc6-68-G in reply to J. Schwiebert, 04-14-2012 12:45:23
|
|
| Hi john. I happen to be one of your students back several years as I had an OC6 gas .. When all the bolts were out of the cover I backed off the brake adjusters enough to raise the cover about 3 inchs Then block it up on each side. there are slots to get at the adjusters. If backed off to far parts may fall in the gear box, be carefull. Now reach in with a GOOD snap ring pliers to free up the shaft. Dont drop the snap ring....Now screw in a three eights bolt and pull out the Hyd, drive shaft. Could be another size not sure. Have fun,I did. when it was all back together I had myself a large brandy then i could relax. THANKS JOHN FOR ALL YOUR HELP charlie.k. All most forgot. could I have your phone number? charlie k.
|
|
| [Show Entire Topic]
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|
