John Deere backhoe attachment

430WLPG

Member
I bought it for my 440ICD w/ 831 loader I think it's a 50 but not sure can't find a tag, has rotary swing motor, doe anyone have a picture?
 
Here's a picture
a66556.jpg
 
It might be a 9300 hoe? I think the 9250 used 2 cylinders for the swing and was smaller. These were the backhoes for the 350, 450 and 550 machines. I'm not sure of the numbers for early backhoes.
 
It might be a 9300 hoe? I think the 9250 used 2 cylinders for the swing and was smaller. These were the backhoes for the 350, 450 and 550 machines. I'm not sure of the numbers for earlier backhoes.
 
I believe this backhoe was also used on the 400 series wheel tractor; just a comment that the 400 was "closed center " hydraulics while the crawler is "open center" I was told you could convert the valve assembly by puting on the appropriate end plate.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top