International 3200 Series A Skid Steer

Steve Urie · Jan 29, 2012

I have a question on my 3200 Series A International Skid Steer. When I go to start it sometimes, while its cranking over, the hydrostatic kicks in and it starts moving while you are trying to start it. So you have to play with the levers a bit while trying to crank it over. Any Ideas what this could be?? Steve.

leej · Jan 29, 2012

When you shut down it should be in the stopped detent. When you either get out or get back in you may be moving the arms or pedals. Either this is your problem or the detents are worn, letting the valve move,therefore moving the skid steer. In cold weather I have this problem also.
In warmed weather I do not. ggp

International 3200 Series A Skid Steer

Steve Urie

New User

leej

Member

Similar threads