(800) 853-2651
SHOP NOW

Kohler command pro CRANK NO START

C

Case450

Member
I can't seeem to find much helpful info on the web and this is a last resort post lol I have a timberking 2000 sawmill with a kohler command pro CH940-CH1000 gas motor with a crank no start issue. I've pulled the spark plugs and they are both wet. I've removed a plug and held it to the block to test for spark and the fumes from the cylinder/sparkplug hole lit on fire so I assume there is spark. Air filters (inner and outer and brand new), fresh motor oil at the proper level as indicated on the dipstick.

I mean, is it flooding? I changed the electric inline fuel pump is it possible it's pushing too much gas?

If anyone has any pointers or tips or ideas please share them and thank you in advance.
 


First thing I'd do is get a new set of proper plugs of a quality make, and if the ones in it currently are Japanese (NGK for instance) stick with them. See if both plugs have a good blue to white spark. Second, I'd make sure my exhaust wasn't plugged and choke isn't stuck. Why did you change the pump? Have you checked the carb for gunk or something holding the float open? Are the valves messed up? Do you have good compression?

Start with the basics and move forward one step at a time.
 
You must log in or register to reply here.

Similar threads

W
John Deere 212 Riding Mower Kohler With A 12 hp K301 AQS
Replies
3
Views
554
T.R.K.
T
F
Kohler Command hard cranking
Replies
1
Views
634
Gene Davis (Ga.)
G
R
no spark
2
Replies
28
Views
3K
Dwd14329
D
D
Ford 640 with high compression pistons
Replies
10
Views
607
RBnSC
RBnSC
G
1950 Ford 8N Won't Start
Replies
7
Views
1K
Eman85
E
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top