I have been working on my neighbors dozer. I pulled, and rebuilt the 201 gas engine. It has nothing to tell me what is what with the drive, there are no decals/stickers. At one time he had it painted orange. I learned what I could, as I did drove it from his house through his field, to my house, 1/4 mile max, about 4 months ago. He does not know how to drive it, his son drives it for him, when ever he goes over there.
Is forward on the levers high, or low. I know the lever next to the drive? levers is forward, & reverse. What is the lever that goes through the floor.
I just got it running, and I can't get it to move yet. So I need to know, what lever does what.
I have the blade raising & lowering, & side to side working. I believe the pump on the front of the crank, powers that.
The drive pump (charge pump) is the one on the front side of the engine. Then to the filter under the seat area, then to the controls, then to the torque converter and so forth. How do I bleed that system?
Thanks, Pat
Is forward on the levers high, or low. I know the lever next to the drive? levers is forward, & reverse. What is the lever that goes through the floor.
I just got it running, and I can't get it to move yet. So I need to know, what lever does what.
I have the blade raising & lowering, & side to side working. I believe the pump on the front of the crank, powers that.
The drive pump (charge pump) is the one on the front side of the engine. Then to the filter under the seat area, then to the controls, then to the torque converter and so forth. How do I bleed that system?
Thanks, Pat