Hi everyone,
I have a 96 scat trac 1700 skid steer and a about a week a go it was running on job and smooth as always, at about third of throttle while sitting still as guys were loading bucket it just slowed down a stopped, I changed filters did all the bleeding but can't get any fuel to pass into the pump and come out the bleeder on there, injection line are dry, never had any problems bleeding after changing filters before, so far I converted to an electric fuel pump, so there's plenty of pressure, I've checked return line to tank and it is open, this pump has electric fuel shut off but it stuck on me a few years ago and I removed it gutted the plunger and put it back in to keep it from leaking and now use the cable stop,,
Any ideas ?? I need to get it on my trailer and home, it sat for about 9 months due to health ploblems and it's been fine through this summer, just trying to get back on my feet and finish a couple small jobs and don't want to put it in a shop or buy a rebuilt pump if I can avoid it, thanks for any help you can offer, I plan to rebuild it myself if need be, just have to get it moved
I have a 96 scat trac 1700 skid steer and a about a week a go it was running on job and smooth as always, at about third of throttle while sitting still as guys were loading bucket it just slowed down a stopped, I changed filters did all the bleeding but can't get any fuel to pass into the pump and come out the bleeder on there, injection line are dry, never had any problems bleeding after changing filters before, so far I converted to an electric fuel pump, so there's plenty of pressure, I've checked return line to tank and it is open, this pump has electric fuel shut off but it stuck on me a few years ago and I removed it gutted the plunger and put it back in to keep it from leaking and now use the cable stop,,
Any ideas ?? I need to get it on my trailer and home, it sat for about 9 months due to health ploblems and it's been fine through this summer, just trying to get back on my feet and finish a couple small jobs and don't want to put it in a shop or buy a rebuilt pump if I can avoid it, thanks for any help you can offer, I plan to rebuild it myself if need be, just have to get it moved