Is there any way to release the drive
motors on an 1835B so I can tow it into my
shop? I can't get to the master links on
the drive chains in it's current spot, they
are all turned to where they aren't
accessible. I was hoping there is a hyd
release valve somewhere on the motors or a
"tow valve" somewhere on there. I was able
to get it loaded running on my trailer
after it came down with its engine issue,
but it only made it about 50 feet to my
shop when it died and won't start at all
with just 2 cylinders working like they
should. I know I could slide it on
something, but that sounds like a pain by
myself. I thought I had an operators manual
that would cover this, but apparently I
have every manual except for the operators
manual. Thanks guys
Ross
motors on an 1835B so I can tow it into my
shop? I can't get to the master links on
the drive chains in it's current spot, they
are all turned to where they aren't
accessible. I was hoping there is a hyd
release valve somewhere on the motors or a
"tow valve" somewhere on there. I was able
to get it loaded running on my trailer
after it came down with its engine issue,
but it only made it about 50 feet to my
shop when it died and won't start at all
with just 2 cylinders working like they
should. I know I could slide it on
something, but that sounds like a pain by
myself. I thought I had an operators manual
that would cover this, but apparently I
have every manual except for the operators
manual. Thanks guys
Ross